|
2016.09-2020.06 天津大学 博士
金属材料疲劳性能评价及寿命预测;氢脆机理及结构完整性分析
(1) Li JH, Li MQ, Guan B, Xin YC, Wu YT, Liu X, Chen G, Uncovering the hydride orientation-mediated hoop fatigue mechanism in a zirconium alloy cladding tube, International Journal of Plasticity, 2022, 159:103440.
(2) Li JH, Sun JY, Qian GA, Shi LT, Defect-induced cracking and fine granular characteristics in very-high-cycle fatigue of laser powder bed fusion AlSi10Mg alloy. International Journal of Fatigue, 2022, 158:106770.
(3) Li JH, Sun JY, Li YJ, Qian GA, Wang ZY, Very-high-cycle fatigue induced growth and amorphization of Si particles in additively manufactured AlSi10Mg alloy: Dependence of applied stress ratio, International Journal of Fatigue, 2022, 107167.
(4) Li JH, Wang ZY, Wu H, Chen G, Microstructural and crystallographic analysis of hydride reorientation in a zirconium alloy cladding tube. Journal of Nuclear Materials, 2020, 537:152232.
(5) Li JH, Wang ZY, Cheng Y, Xin YC, Wu H, Guo X, Chen G, Effect of hydride precipitation on the fatigue cracking behavior in a zirconium alloy cladding tube. International Journal of Fatigue, 2019, 129:105230.
(6) Li JH, Cui Y, Wu H, Chen G, Deformation mechanism of Zr–Sn–Nb–Fe cladding tube under various stress states. Materials Science and Engineering A, 2019, 771:138593.
(7) Zhang J.M., Li J.H., Sun J.Y., et al. High-cycle and very-high-cycle fatigue lifetime prediction of additively manufactured AlSi10Mg via crystal plasticity finite element method. International Journal of Fatigue, 2022:106577.
国家自然科学基金-青年基金项目;中国博士后面上基金;
|